Firestone RubberCover EPDM is a 100% cured single-ply roofing membrane made of a synthetic rubber Ethylene-Propylene-Diene Terpolymer. Since 1980, more than 1.000.000.000 m² of Firestone EPDM membranes have been successfully installed on commercial, industrial and residential roofs worldwide.
No, there is no difference between the top and bottom of the membrane.
No, the Firestone RubberCover EPDM membrane is resistant to UV and ozone.
Firestone RubberCover EPDM membranes offer unmatched resistance to UV radiation, ozone, alkaline rains and high or low temperatures. Recent studies show that the membrane has a life expectancy of more than 50 years, even when exposed to sunlight.
No specific maintenance is required for a Firestone RubberCover EPDM roofing system. However, Firestone recommends a yearly inspection of the roof.
The membrane is less resistant to oil products. Contact with mineral and vegetable oils, petroleum based products, fresh bitumen and grease must be avoided.
The membrane can be easily repaired with a piece of Firestone RubberCover QuickSeam SA Flashing.
No, the membrane is only available in black.
Compatible substrates are wood, Firestone ISOGARD HD insulation boards, PIR and PUR insulation, bitumen, concrete, masonry, aluminium, zinc and lead. Firestone RubberCover EPDM can overlay virtually any old roof, provided the roof decking is sound and the existing structure can carry the load of the new roofing system.
No. Ponded water, snow, frost and ice must be removed from the roof surface before installation of the membrane.
The surface must be clean, smooth, dry and free of sharp and/or loose objects and/or foreign materials such as oil, grease, and/or other contaminants. Therefore, it is recommended to sweep the substrate with a brush prior to the installation of the membrane.
Yes, the minimum temperature required for application of RubberCover Bonding Adhesive is + 5°C and the maximum humidity is 80 %.
No. Firestone Bonding Adhesive must always be applied two-sided, i.e. both to the underside of the membrane as well as to the substrate.
The coverage rate is 1 liter per 2 m² (two-sided).
No, except when the membrane is extremely dirty, in which case it must be cleaned with water and a clean rag.
Firestone QuickPrime Plus primer must be used with ALL Firestone QuickSeam products in order to clean and prime the membrane before application of the QuickSeam products.
Besides the Firestone RubberCover QuickScrubber tool and hand roller, following tools are needed: scissors, measurer, solvent resistant paint roller, chalk line, bucket, mixer (for Bonding Adhesive), clean rags, broom.
Firestone Bonding Adhesive and Firestone QuickPrime Plus can only be used in well ventilated areas. Both products must be kept away from ignition sources. Do not smoke when using. Firestone recommends wearing gloves when applying Firestone QuickPrime Plus. For further information, please consult the Safety Data Sheets and/or the information shown on the product labels.
Following materials can be used to insert drains: EPDM, zinc, flexible PVC, galvanized and stainless steel.
The use of double-walled penetrations is required.
The roof can be accessed for periodical maintenance. In case of regular roof traffic, the membrane must be protected with pavers.
No. The Firestone RubberCover EPDM membrane is only suitable for roofs, façades and gutters.
A sedum vegetation can be placed over the RubberCover EPDM membrane, provided that a root resistant geotextile is used between the vegetation and the membrane. A distance of 30 cm must be taken in account between the vegetation and every roof installation detail.
Yes, it is possible to cover the membrane with gravel, pavers or bankirai wood but the membrane must always be fully adhered to the substrate. Firestone recommends the use of a protective geotextile (polyester 300 g/m²) between the membrane and the ballast.
Firestone provides a 10 year material warranty.
1930 Zaventem, Belgium