Firestone RubberGard EPDM QuickSeam Products

QuickPrime Plus
QuickSeam Splice Tape
QuickSeam Reinforced Perimeter Fastening Strip
QuickSeam RMA Strip
QuickSeam Batten Cover Strip
QuickSeam FormFlash
QuickSeam SA Flashing
QuickSeam Flashing
QuickSeam Pipe Flashing
QuickSeam Conduit Flashing
QuickSeam Penetration Pocket Kit
QuickSeam Walkway Pads
  • QuickPrime Plus:
    high solids primer designed to clean and prepare the RubberGard EPDM membrane and/or substrate prior to application of QuickSeam products, Pourable Sealer or Lap Sealant. It must be applied with a QuickScrubber or QuickScrubber Plus pad and handle. Technical Information Sheet (TIS)
  • QuickSeam Splice Tape:
    EPDM/butyl-based, self-adhesive tape designed for field splicing of Firestone RubberGard EPDM membrane panels. It is fully cured and provides consistent adhesive thickness within the seam. Technical Information Sheet (TIS)
  • QuickSeam Reinforced Perimeter Fastening Strip (RPFS):
    A strip of reinforced EPDM membrane with a QuickSeam tape strip factory laminated to it along one edge. The strip is used to execute non-penetrating base tie-in details. Technical Information Sheet (TIS)
  • QuickSeam RMA Strip:
    A strip of reinforced EPDM membrane with a QuickSeam tape strip factory laminated to it along both edges. The strip is used for non-penetrating RubberGard EPDM membrane attachment in Firestone RMA Systems. Technical Information Sheet (TIS)
  • QuickSeam Batten Cover Strip:
    152 mm (6") wide semi-cured EPDM strip laminated to a QuickSeam tape. The strip is designed to cover, protect and seal batten bars in Firestone MAS Systems. Technical Information Sheet (TIS)
  • Firestone 9" (229 mm) and 12" (305 mm) QuickSeam FormFlash:
    uncured EPDM strip factory laminated to QuickSeam Tape designed to flash inside and outside corners, pipes and other roof penetrations. Technical Information Sheet (TIS)
  • QuickSeam SA Flashing:
    450 mm wide strip of fully cured EPDM membrane laminated over its entire width to a QuickSeam Splice Tape. The SA Flashing can be used to easily wrap curbs, flash parapets and line gutters, carry out general roof repairs where cured EPDM is required, flash in drain insert pieces and pipe flanges. Technical Information Sheet (TIS)
  • QuickSeam Flashing:
    127 mm (5") wide uncured EPDM strip laminated to a QuickSeam tape. The strip is designed to flash metal roof edging profiles. Technical Information Sheet (TIS)
  • QuickSeam Pipe Flashing:
    'one size fits all' preformed EPDM pipe boot used for flashing of round, accessible penetrations of 25 mm to 150 mm. Technical Information Sheet (TIS)
  • QuickSeam Conduit Flashing:
    'one size fits all' preformed EPDM pipe boot used for flashing of round, accessible penetrations of 13 mm to 64 mm. Technical Information Sheet (TIS)
  • Penetration Pocket Kit:
    kit specifically designed to be used around small pipe penetrations, clusters of pipes, l-beams, etc. Technical Information Sheet (TIS)
  • QuickSeam Walkway Pads:
    high quality rubber pads with QuickSeam Tape factory laminated to the bottom and used for protection of RubberGard EPDM membranes in areas of regular traffic. Technical Information Sheet (TIS)