QuickSeam Products
Discover our range of EPDM field-seaming products that are easy to use and show long-term performance below.
Discover our range of EPDM field-seaming products that are easy to use and show long-term performance below.
QuickPrime Plus is a high solids primer designed to clean and prepare the GeoGard EPDM geomembrane and/or substrate prior to application of QuickSeam products. It must be applied with a QuickScrubber pad and handle.
The QuickSeam Splice Tape is a EPDM/butyl-based, self-adhesive tape designed for field splicing of GeoGard EPDM geomembrane panels. It is fully cured and provides consistent adhesive thickness within the seam.
The QuickSeam Batten Cover Strip is a 152 mm (6") wide, semi-cured EPDM strip laminated to a QuickSeam tape. The strip is used to cover and seal Batten bars,and strip in seams when additional protection is required.
The QuickSeam FormFlash consists of a 152 mm (6"), 229 mm (9") or 305 mm (12") uncured EPDM strip factory-laminated to QuickSeam Tape. The strip is designed to flash inside and outside corners, pipes, penetrations and other applications as specified in the Firestone specifications and details.
The QuickSeam SA Flashing is a 457 mm (18") wide, 1.52 mm thick non-reinforced EPDM membrane, fully laminated to QuickSeam Tape. The SA Flashing can be used to easily flash details where cured EPDM is required or preferred and for repairs.
The QuickSeam Pipe Flashings are specifically designed for flashing of round penetrations on flat areas, above water level. QuickSeam Pipe Flashings will fit various penetrations (25 mm to 150 mm) and must be cut to correct pipe diameter before installation.
The QuickSeam Corner Flashing is a slow self-curing round rubber piece with a diameter of 216 mm, adaptable to irregular shapes and designed to flash system details (inside and outside corners, reinforcement patches...) in accordance with Firestone specifications. The FormFlash layer is factory laminated to QuickSeam Tape.
This repair kit contains all the items necessary to repair 2 small holes should they occur in your GeoGard EPDM geomembrane. In the kit are step by step instructions on how to complete the repair.
The QuickSeam Geomembrane Patch is a 100 mm x 100 mm non-reinforced EPDM membrane fully laminated to QuickSeam Tape. It is designed to repair damages in geomembranes such as nicks, gouges, holes and small cuts up to 10 mm long.
Ikaroslaan 75
1930 Zaventem, Belgium